LEBELO LE LEHOLO LE HOLIMO
HIGH SPEED STEEL e phuthetsoe Round bar
Phahameng Speed Steel Flat bareng
Phahameng Speed Steel siloa shoa Block
Phahameng Speed Sheets
Thepa:
- Ho hanyetsa hantle haholo
- High khatello ea ho hanyetsa
- Ho ba thata haholo
Kopo:
LITLHAKU TSE KHOLO TSE BOTSOANG li rehiloe lebitso ho bontša bokhoni ba tsona ba ho hanela ho nolofala ha lithemparetjha tse phahameng ka hona ho boloka bohale bo bohale ha mabili a le boima 'me lebelo le le holimo. Ke tsona tse sebelisang lisebelisoa tsa tšepe haholo. Hangata li na le li-tungsten kapa molybdenum tse ngata, chromium, Cobalt le vanadium, hammoho le khabone.
Lihlopha tse peli lia fumaneha: Mefuta ea Molybdenum le Mefuta ea Tungsten
MOLIBELI MOLIBELI lisebelisoa tse lebelo haholo li na le molybdenum ea 3.50 ho ea ho 9.50%. Li na le li-tungsten tsa 4,00% le vanadium ea 1.00 ho ea 5.00%. Carbon e phahame ka mokhoa o batlang o lekana — 0,80 ho isa ho 1.50%. Likopo li koahela lisebelisoa tse fapaneng tsa ho itšeha. Mehlala e kenyelletsa tsena: li-drill tse sothehileng, li-reamers, li-cutting, lisebelisoa tsa lepolanka le li-planer, lithipa tsa cutoff le li-cutter blades.
LETJHABANE lisebelisoa tse lebelo haholo li na le tungsten ea 12.00 ho isa ho 20.00%. Li boetse li na le chromium le vanadium e ngata, 'me tse ling li na le cobalt e ngata. Carbon e phahame-0.70 ho isa ho 1.50%, ho latela sehlopha. Lisebelisoa tsa lisebelisoa li kenyelletsa likotoana, ho ikoetlisa, li-reamers, lipompo, li-broaches, li-cutting cutters, hobs, punches le ho shoa.
Haholo-holo HIGH SPEED STEEL Kereiti ea No. Re Filoe:
| HISTAR |
METSOALLE |
ASTM |
JIS |
| HSG6 | 1.3343 | M2 | SKH51 |
| HSG6CO | M2 Mohlala. | ||
| HSG18 | 1.3355 | T1 | SKH2 |
| HSG35 | 1.3243 | M35 | MOKHATSI |
| HSG42 | 1.3247 | M42 | TLHANG59 |
| EA-64-HSG | M4 | SKH54 | |
| HSG7 | 1.3348 | M7 | SKH58 |
Boholo:
|
SEhlahisoa |
MAIKUTLO A PHIHLELLO LE LITLHAKU TSE FUMANEHANG |
|||
|
POTSO LEBAKENG |
HO KHOA LEBAKA |
LEBAKENG SEBAKENG |
PEELED |
RETS'ELISITSOE |
|
TLHOKOMELISO MO MM |
2.5-12.0 |
8.5-16 |
16-75 |
75-250 |
|
LIEKETSO |
HOTLE POLOKO MOTSOA |
Forged mahlakoreng 'ohle khutsisitsoe |
||
|
Boholo IN MM |
6X6-50X50 |
51X51-200X200 |
||
|
LEFATSANE BAR |
HOTLE POLOKO MOTSOA |
LITLHAKU TSE TSOANG TSOHLE TSOHLE E KOPITSOE |
||
|
BOTSOANG X BOPHELO KA MM |
3-40 X 12-200 |
50-100 X 100-200 |
||
|
LIEKETSE LIEKETSE |
BOLOKOA BOLA |
HOTSOA ROLOLA |
||
|
BOTALA x BOPHELO xLENGTH IN limilimithara |
1.2-3.0X600-800MM-1700-2100MM |
3.10-10.00X600-800MM-1700-2100MM |
||
|
Disc |
100-610MM DIA X1.2-10MM NTSANE |
|||
Sebopeho sa lik'hemik'hale:
|
HISTAR |
METSOALLE |
ASTM |
MOTLATSI KHEMIKI |
LETLOTLO |
SEBELISO |
|||||||
|
C |
Si |
Mong |
Kr |
Mong |
V |
W |
Khoebo |
|||||
|
HSG6 |
1.3343 |
M2 |
0.86-0.94 |
0.20-0.45 |
0.20-0.40 |
3.75-4.50 |
4.50-5.50 |
1.70-2.10 |
5.50-6.70 |
- |
Motsoako o motle oa ho hanyetsa, ho ba thata le ho ba thata ho chesa. Matla a phahameng a ho qhekella bakeng sa ho hanyetsa deformation, ho fokotsa ts'oaetso ho, ho roka le ho theola bohale. |
Bakeng sa mefuta eohle ea lisebelisoa tse hanang ho roala tse tsamaisang thothomelo, joalo ka lisebelisoa tsa Lathe, lisebelisoa tsa Planer, li-drill, Taps, Reamers, Broaches, cutters cutter, Foromo cutters, Thread chasers, End Mills, Gear cutters |
|
HSG35 |
1.3243 |
M35 |
0.87-0.95 |
0.20-0.45 |
0.20-0.45 |
3.75-4.50 |
4.50-5.50 |
1.70-2.10 |
5.50-6.70 |
4.50-5.00 |
Cobalt e kentse tšepe ea M2 e lebelo haholo eo ho eona kenyelletso ea cobalt e fanang ka thatafalo e chesang, Bothata bo chesang bo chesang bo etsa hore tšepe e tšoanelehe bakeng sa ho betla litšepe tse matla le li-prehardened, lits'epe tse phahameng tsa thatafalo |
Likoetlisong tsa ho sotha, lipompo, ba sehang litšila, li-reamers, li-broaches, lisakha, lithipa le li-hobs. |
|
HSG42 |
1.3247 |
M42 |
1.05-1.15 |
0.15-0.65 |
0.15-0.40 |
3.50-4.25 |
9.0-10.0 |
0.95-1.35 |
1.15-1.85 |
7.75-8.75 |
Tšepe ea pele ea cobalt e lebelo haholo e nang le thatafalo e phahameng haholo le thatafalo e chesang e phahameng, khanyetso e ntle ea ho roala ka lebaka la thatafalo e phahameng ea kalafo ea mocheso, lula u le bohale 'me u le thata liketsong tsa ho seha tse boima haholo. |
Bakeng sa lisebelisoa tse rarahaneng le tse nepahetseng tsa ho itšeha bakeng sa ho itšeha ka thata le ka lebelo le phahameng, ho ikoetlisa ho sotha, ho tlanya, ho seha li-milling, li-reamers, li-broaches, lisakha, lithipa le ho tsamaisa likhoele hoa shoa. |
|
HSG18 |
1.3355 |
T1 |
0.65-0.75 |
0.20-0.45 |
0.20-0.45 |
3.75-4.50 |
- |
0.90-1.30 |
17.25-18.75 |
- |
Tungsten e thehiloeng HSS, Molemo motswako wa toughness le khubelu thatafala. Ho hanela ho roala le ho nolofatsa. Ho bonolo ho thatafatsa. |
Likoetlisong tse sothehileng, lisebelisoa tsa ho itšeha, lisepa tsa ho sila, lisele tsa mochini oa faele, lisebelisoa tsa lepolanka, lisebelisoa tsa ho rala, lithulusi tsa ho kuta. |